Gloss Enamel Ink (Black & White)

SUBSTRATES : PAPER, METAL, GLASS, WOOD, MASONITE, TREATED POLYPROPYLENE & POLYETHYLENE (P&P), PRESSURE SENSITIVE MATERIALS.

APPLICATION : OUTDOOR METAL SIGNS & DISPLAYS, LICENSE PLA TES, NOVELTIES, PACKAGING CONTAINERS, REFLECTIVE SIGNAGE.

Product Information

A high gloss multi-purpose ink designed for long term outdoor application. Ideal for exterior traffic signs, POP/displays, treated (P&P) containers.

Application Information

Thinning : May be used straight from the can but it is recommended to thin 5% by weight with GLE-1800 Thinner. When more than 5% thinning is required, it is recommended to use GLE-1900 Thinning Varnish to maintain optimum gloss. For maximum lightfastness or outdoor durability, little or no thinning is recommended.

Additives : GLE-1700 Clear should only be used to increase transparency of colors. However, this will reduce the durability and lightfastness of the color. Use a small amount of GLE-1730 Process Clear ink to improve print quality, if required. To prevent ink skinning in can, spray a light mist of GLE-1950 Anti-Skinning Agent on the surface of ink in partially used cans. Repeat whenever ink can is opened for reuse.

Wash-Up : GLE-1800 Thinner GLE-1840 Wash-Up

Coverage : Approximately 1300 sq.ft./1 U.S. Gallon using a 230/in. monofilament fabric.

Fabric/Stencil : 158 to 280 monofilament fabric. All stencil systems are suitable. Drying : By oxidation in approximately 1 1⁄2 to 4 hours for over printing or overnight before final stacking. Best rack-drying results are obtained when an ambient temperature is more than 20 °C (68 °F). Prints may be forced dried 15-20 min. in an oven with temperature not exceeding 120 °C (250 °F). Baking at temperatures higher than recommended may cause loss of gloss. To speed drying time under adverse humid or cold weather conditions, add approximately 40-50 grams of GLE-1880 Accelerator to a gallon of ink.

Die Cutting/Creasing : Can be successfully die cut or creased but should be tested prior to production .